Flymaster GPS User Manual Download Page 33 | Manualshive

Page: 33 / 58

Flymaster GPS User Manual Download Page 33

the moment. The lower the pdop value the more accurate the position x.

Figure 4.19: Set Altimeter

4.8.2 Time

The Time page allows the user to set the vario integration time, track log parameters, and the Universal

Coordinated Time ((UTC) oset). (Figure

4.20

)

Figure 4.20: Timing Parameters

The current rmware version supports two interval related parameters the Vario Integrator and Track

Interval.

Vario Integrator

The Integrated vario is calculated by integrating the vertical speed during a period of X seconds dened

by this value. In the example of Figure

4.20

, the integration period is 10 seconds (default value).

Track interval

During ight the GPS stores a track log point every track interval seconds. Track recording starts auto-

matically when the Flight Starts (see Section

1.7

). However, when a task is active the GPS will store a

track log point immediately as it enters a turn point cylinder

.

See Section

4.6

about track log memory capacity.

UTC oset

Using GPS data, the GPS automatically adjusts the internal clock to the Universal Coordinated Time

(UTC). The user should adjust the UTC oset so that the time displayed by the GPS matches the local

time.

4.8.3 Vario Acoustics

The Vario Acoustics settings menu option allows the user to change vario sound related parameters. The

user can change the climbing, and sinking rate sound through the respective threshold values. These

thresholds correspond to the climbing and sinking rates at which the sound activates. The user can also

dene in the Acoustic Thresholds option the sink alarm and the sound volume of is the GPS (Figure

4.21

).

32

All manuals and user guides at all-guides.com

«
...
31
32
33
34
35
...
»

Summary of Contents for GPS



























































Reviews:

No comments