7.8.7
Operation Mode
Choose the Operation Mode as Basic Mode or Advance Mode.
8
Trouble Shooting
This section provides solutions to problems that can occur during the installation and operation of the IP phone. Read the following
descriptions if you are having problems.
8.1 No Operation after Power On
Solution:
Check if the power adapter is properly connected.
If applicable, check if the PoE (Power over Ethernet) switch behind the IP phone is set correctly.
8.2 Long Time Stop at “Initializing Network”
Solution:
Check if the Ethernet cable is properly connected.
Check if the DHCP server is working normally.
Check if the connection between the DHCP Server and FIP12/FIP12W is properly connected.
8.3 No Dial Tone
Solution:
FLYINGVOICE
Page 78 of 81
