Step 2.Refer to the
7.6.4.1 Black List
to add blacklist.
5.5 Placing a Call on Hold
When FIP12/FIP12W is during one active call:
Step 1.Pressing the
button to put the active call on hold, then you will hear a dial tone, the remote party will hear the hold music
Step 2.User can input the phone number to make call
Step 3.Pressing the
button again to release the previously Hold state and resume the bi-directional media.
5.6 Three Way Conference Calls
Step 1.To initiate a conference call, press the
button during an active call and the first call is placed on hold, and you will hear a dial
tone.
Step 2.Dial the second person’s telephone number
Step 3.After the second person answers the call, press
CONF softkey button
to start the conference call; all three parties will be participating in
a conference call.
Note: If you hang up firstly, the other two parties will be disconnected; if one party hangs up firstly, you can go on talking with the other party.
5.7 Attended Transfer
You call the person to whom you are transferring the call and speak to them before transferring the call:
Step 1.To initiate a transfer; press the
button during an active call. This places the first call on hold and you will hear a dial tone.
Step 2.Dial the second person’s telephone number.
Step 3.When the second person answers, you can have a private conversation with the second person without the first person hearing it.
Step 4.To connect the call to the second person, press the
XFER
softkey button
to complete the transfer. You will be disconnected from the call.
Step 5.If you hang up during the call with the second person before pressing
XFER softkey button
, the transfer is not completed; this only ends
FLYINGVOICE
Page 26 of 81
