Chapter 3 Basic Settings
FGW4148-16S/32S/48S User Manual
24
SIP Account Register
FGW4148-16S/32S/48S have 16/32/48 Lines to make SIP (Session Initiation Protocol) calls. Before registering,
the device user should have SIP accounts configured by the system administrator or provider. See the
section below for more information.
Register one by one
Table 10
Config SIP the Web Management Interface
Steps:
Step 1. The account enable is set to "On" and the line can be used after opening.
Step 2. The registration server fills in the IP address of the SIP server.
Step 3. Display Name Fill in the content is the name of the number displayed on the LCD.
Step 4. The registration account is filled with the account provided by the SIP server.
Step 5. The name of the authentication is the SIP account provided by the SIP server.
Step 6. The password is filled with the password provided by the SIP server registration account.
Step 7. When you are finished, click the Save button at the bottom of the page to make the configuration
take effect.
Step 8. Check the registration of the corresponding line on the display / web status page.
Notes
Step 3-9 is to fill in the required content, other parameters fill in the required
从网页：
