Chapter 2 IVR Voice Prompt
FGW4148-16S/32S/48S User Manual
18
9
WEB Access
Port
1.
Pick up phone and press “****” to start IVR
2.
Choose “9”, and the router reports “ WEB Access Port”
3.
Prompt “Please enter password”, the method of inputting password is same as
operation 1.
4.
Report “operation successful” if user operation is ok.
5.
Report the current WEB Access Port
0
Firmware
Version
1.
Pick up phone and press “****” to start IVR
2.
Choose “0” and the router reports the current Firmware version
Note
1.While using Voice menu, press * (star) to return to main menu.
2.If any changes made in the IP assignment mode, the router must be rebooted in order for
the settings to take effect.
3.While entering an IP address or subnet mask, use "*" (star) to enter "." (Dot) and use "#"
(hash) key to finish entering IP address or subnet mask:
4.For example, to enter the IP address 192.168.20.159 by keypad, press these keys:
192*168*20*159, use the #(hash) key to indicate that you have finished entering the IP
address.
5.Use the # (hash) key to indicate that you have finish entering the IP address or subnet mask
6.While assigning an IP address in Static IP mode, setting the IP address, subnet mask and
default gateway is required to complete the configuration. If in DHCP mode, please make
sure that a DHCP server is available in your existing broadband connection to which WAN
port of FWR8102 is connected.
7.The default LAN port IP address of FWR8102 is 192.168.11.1 and this address should not be
assigned to the WAN port IP address of FWR8102 in the same network segment of LAN
port.
8.The password can be entered using phone keypad, the mapping table between number and
