14
Use the entire length of wedge to make the pipe as fit as possible to the plug.
In order to avoid the pipe to slip off from its housing accidentally, fasten it using the proper clamps
free from edges that may cut it.
If necessary, i
nsert a anti pulsations. This will avoid excessive “stress” to the
gauge, the carburattors, the injector and all elements could be deteriorate if
pressure is not linear and constant enough.
The tests will be performed by experienced and qualified people with the use of
tools to carry out the controls properly.
9. Remove the pin 6mm and install instead the
Oldham Joint
with grease