Flux FLUXTRONIC, Original Attachment

Page: 47 / 84

Attachment FLUXTRONIC Automatic Mode 47 / 84
ENGLI
SH
5.9 Change pulse redirection [ ]
Pulse redirection is intended for other applications or units that can also process
the input pulse from the electronic analysis unit. The input pulse is processed by the
FLUXTRONIC and converted into a rectangular pulse without contact bounce and
then emitted. An isolating amplifier with a NAMUR input, capable of switching up to
150 Hz, is needed to use this signal.
5.10 Reset all settings to default values [DEF]
The following settings are entered when all settings are reset to default values.
Area Designation Action
START Volumes to be filled [S1] at
memory 0 .. 9
Deleted
START Memory location [BC] 0
TOT Total volume Deleted
TOT Decimal place [DEC] 0
FLO Time unit [UNIT] min
FLO Decimal place [DEC] 0
FLO Gate time [GATE] 3.0 s
CAL Memory [CAL] 0
CAL Setting value [SET] All memories to 0.0500000
CAL Unit [UNIT] All memories to "L"
CAL Decimal place [DEC] 0
SET Decimal place [S1] and [S2] 1
SET Security level [LOC] 0
SET PIN number [PIN] 000
SET Volume [S2] OFF
SET Err OFF
SET Ext OFF
SET OK OFF
SET AC OFF
SET
Pulse redirection [ ]
OFF