9
VIBRONET Installation 06.2016
2.4 Residual risks and protective measures
VIBRONET Signalmaster is proven to be safe if used as intended.
Operating errors or improper use of the system can result in the fol-
lowing:
-
Personal injuries
-
Damage to the system or the machine
Risk of injury due to electric shock!
Improper connection of the system to the power supply can result in
risk of injury due to low voltage (230 V).
• The electrical connection must be established by a qualified elec-
trician.
• The mains voltage must conform to the IEC guidelines.
• During installation, repairs and maintenance of the system, it must
be disconnected from the power supply.
Danger due to improperly laid cables
Personnel may stumble over an improperly laid cable and injure
themselves. The cable can be damaged due to external influences.
• Lay the cable in such a way that no one can stumble over it.
• Use cable ties or a Velcro fastener to fix the cable in place.
• Lay the cable in a cable duct or protective tube.
Damage due to contamination
In a loaded industrial environment, the system components may have
their function impaired or be damaged due to contamination or mois-
ture when the switch cabinet is open.
• Keep the switch cabinet closed as much as possible.
Incorrect measurements due to electromagnetic interference
High frequency rays or electrostatic discharge in the vicinity of the
system and measuring equipment can lead to incorrect measure-
ments.
• Do not lay the sensor cables in the vicinity of heavy current lines.
• Select an installation site with low electromagnetic radiation expo-
sure.
Safety
