3. OPERATION
Page 71
© 2005-2007 DH Instruments, a Fluke Company
to support his/her six most commonly used units. This allows RPM4-AD to offer a very wide
selection of units without having to deal with a long unit list in day to day operation.
OPERATION WITH RPM4 A160K/A160K
To customize the
[UNIT]
function key, press
[SPECIAL]
,
<6PresU>
from the MAIN RUN
screen. The display is:
Select the Q-RPT and measurement modes for which
the UNIT function menu is being customized. The
<other> selection covers the measurement modes
other than absolute (gauge, negative gauge,
differential) when applicable.
Setup unit for Q-RPT
1Hi abs 2Hi other
3HL abs 4HL other
The next display is:
1. Entry field to specify which unit position (1 to 6) of the UNIT
function menu is to be changed.
Set up unit #6
for Hi absolute mode
Enter the number of the unit position on the UNIT function menu that you would like to change.
The next display lists the types of measurement unit supported by RPM4-AD.
Select the unit type.
<SI>
and
<other>
are pressure
units. Not all unit types are available for all Q-RPTs
and measurement modes.
Unit#6 1SI 2other
3altitude 4airspeed
5user
See Table 13 for definition of unit type availability by Q-RPT and measurement mode. If the
measurement unit type selected is not available for the selected Q-RPT and/or measurement
mode,
<Not available on [Q-RPT], [measurement mode]>
is displayed. Press
[ESC]
to
return to the unit type selection screen and select a valid unit type.
Table 13.
Available unit of measure types by active Q-RPT and measurement mode,
RPM4-AD A160K/A160K (rotary wing)
UNIT TYPE
Q-RPT
MEASUREMENT
MODE
PRESSURE
ALTITUDE
AIRSPEED
USER
Absolute
<a>
Yes
1
Yes
1
No Yes
1
Hi and
Lo
parallel
<HL>
Gauge,
negative gauge
<g>
Yes
1
No
2
Yes
2
Yes
1
Absolute
<a>
Yes No No
Yes
Hi
<Hi>,
<Hd>
Gauge
,
negative gauge
<g>
,
differential
<d>
Yes No
2
Yes
2
Yes
1. Best measurement uncertainty .
2. Altitude measured by Lo Q-RPT can be displayed while measuring airspeed.
After selecting the unit type, select the unit. Table 14 lists the unit selection menus by unit type.
