Fluke OptiView III Series, Getting Started Manual, Page: 36 / 58

1
Before You Start
Safety Information
The following symbols are used on the product and in this document:
The OptiView TM Series III Workgroup Analyzer (hereafter referred to as the “analyzer”) complies
with:
*
Class 1 Laser product 21 CFR 1040.10 & 1040.11, CFR(J)
)
CSA C22.2 No 950, and EN60950
W
Warnings
To avoid possible electric shock or personal injury, follow these
guidelines:
Do not use this product if it is damaged. Before using the product,
inspect the case. Look for cracked or missing plastic. Pay particular
attention to the insulation surrounding the connectors.
Do not operate the product around explosive gas, vapor or dust.
No serviceable parts. Do not try to service.
Do not connect a telephone line to this product.
j
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
W
PLEASE READ MANUAL FOR SAFETY
P
COMPLIES WITH EUROPEAN UNION DIRECTIVE
W
SHOCK HAZARD
*
CLASS 1 LASER PRODUCT. DO NOT LOOK INTO LASER
w
RECYCLE LITHIUM ION BATTERIES
)
COMPLIES WITH CAN/CSA-C22.2 NO. 60950-1 CANADIAN STANDARDS, AND
UL 60950-1 (US STANDARDS)
/
DO NOT DISPOSE OF LITHIUM ION BATTERIES IN GARBAGE, RECYCLE
MEETS AUSTRALIA EMC REQUIREMENTS