Fluke MP Series Abridged User Manual Download Page 43

Page: 43 / 65

Accessories

Overview

7 Accessories

7.1 Overview

A full range of accessories for various applications and industrial environments are available. Accessories include
items that may be ordered at any time and added on-site. These include the following:

Mechanical:

•

Mounting Plate (A-MP-MP)

•

Adjustable Mounting Base (A-MP-RMB)

•

Tube Fittings (A-MP-FS-xxx)

•

Thermostat (A-MP-THERM)

•

Spare Window Kit (S-MP-WK-xx)

•

Air Purge Kit including 2 fittings and mounting material (A-MP-AP)

Electrical:

•

Power Supply Cable (A-CB-xx-PS-xx)

•

Ethernet Cable (A-CB-xx-M12-W04-xx)

•

Alarm trigger cable, 7.50 m (25 ft), up to 180°C (356°F) (A-CB-HT-M16-W06-07)

•

Current output cable, 7.50 m (25 ft), up to 180°C (356°F) (A-CB-HT-M16-W04-07)

•

Coupling socket PG7 4-pin connector (A-CON-M16-P04)

•

Coupling socket PG7 6-pin connector (A-CON-M16-P06)

•

Power Supply DIN Rail (A-PS-DIN-24V)

•

Portable power supply 100

– 240 VAC / 24 VDC / 1 A (A-MP-PS-PORT-24V)

•

RS485 Interface Kit (A-MP-CONV-SERIAL-xxx)

•

USB/RS485/RS232 converter (A-CONV-USB485)

Fiber Optic:

•

Fiber-Optic/RJ45 Converter (A-CON-xFO-xRJ45)

•

Fiber Optic Cable (A-CB-FO-xxx)

•

Connection box with Ethernet/fiber optic converter and power supply (A-CONV-2FO-4RJ45-ENC)

Ethernet based Input / Output Modules:

•

Basic Kit (A-IO-BASICKIT), contains:
Fieldbus Coupler 750-352, Supply Module 750-602, End Module 750-600

•

Digital Input Module 750-1406, 16 channels (A-IO-16DI)

•

Digital Output Module 750-1504, 16 channels (A-IO-16DO)

•

Passive Isolator 857-452 (A-IO-2A-ISO)

•

Analog Current Output Module 750-563, preset to 0

– 20 mA, 2 channels (A-IO-2AOC-0)

•

Analog Current Output Module 750-563, preset to 4

– 20 mA, 2 channels (A-IO-2AOC-4)

•

Analog Voltage Output Module 750-562, preset to 0

– 10 V, 2 channels (A-IO-2AOV)

•

Relay Output Module 750-513, normally open, 2 channels (A-IO-2R-NO)

•

Relay Output Module750-517, change over, 2 channels (A-IO-2R-CO)

For more details, see the dedicated manual

„I/O Module System for Infrared Linescanners“.

Summary of Contents for MP Series


































































Search results

Summary of Contents for MP Series

Reviews:

Brands by name

Popular brands

Fluke MP Series, Abridged User Manual

Search results

Summary of Contents for MP Series

Reviews:

Brands by name

Popular brands