Fluke MP Series Abridged User Manual Download Page 21

Page: 21 / 65

Technical Data

Environmental Specifications

2.4 Environmental Specifications

Ingress Protection

IP65 (IEC 60529)

Ambient Operating Temperature

All

0 to 50°C (32 to 122°F) without cooling
max. 180°C (356°F) with integrated water cooling (Standard)

Internal Operating Temperature

Scanner

0 to 60°C (32 to 140°F)

Laser

automatic switch off at < 5°C (41°F) or > 50°C (122 °F)

Storage temperature

-25 to 65°C (-13 to 149°F)

Humidity

10% to 90%, non-condensing (operating and storage)

Vibration and shock

IEC 60068-2-6, 3 axes, 10 to 150 Hz, operating 2 g above 20 Hz
IEC 60068-2-27, 3 axes, operating: 5 g at 11 ms, 15 g at 6 ms

EMC

EN 61326-1:2013 industrial

KCC

Electromagnetic Compatibility - applies to use in Korea only. Class A Equipment
(Industrial Broadcasting & Communication Equipment)

This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or
user should take notice of it. This equipment is intended for use in business environments and is not to be

used in homes.

Warm up Period

30 min.

MTBF

40,000 h (about 4.5 years) meantime between failures (MTBF)
for the mechanical scanning system at 48 Hz scan rate

Weight

7 kg (15.4 lbs), incl. air purge

at still air (e.g. by using a protective housing)

Summary of Contents for MP Series


































































Search results

Summary of Contents for MP Series

Reviews:

Brands by name

Popular brands

Fluke MP Series, Abridged User Manual

Search results

Summary of Contents for MP Series

Reviews:

Brands by name

Popular brands