manualshive.com logo in svg

Fluke MicroScanner Series, User Manual, Page: 21 / 70

Share
Download
Fluke MicroScanner Series User Manual Download Page 21

MicroScanner

2

 Features

11

On/off key.

, 

: Scrolls through screens and changes settings. 

In toner mode, these keys cycle through the IntelliTone 
and analog toner songs.

: Selects the RJ45 or coaxial connector as the active 

port.

: Cycles through the cable test, toner, and PoE 

detect modes.

For additional modes, hold down keys while turning the 
tester on:

•

 + 

: Lets you calibrate length measurements 

and select meters or feet as the length unit. See 
pages 14 and 52.

•

 + 

: Activates a demonstration mode where 

the tester shows examples of test result screens.

Note

Auto shutoff is disabled in demonstration 
mode.

•

+ 

: Displays the version and serial number 

screens.

LCD display with backlight.

F-connector for connecting to 75 

Ω

 coaxial cable.

Modular jack for connecting to telephone and twisted 
pair network cable. The jack accepts 8-pin modular 
(RJ45) and 6-pin modular (RJ11) connectors.

Wiremap adapter with F-connector and 8-pin modular 
jack. See page 15. 

Optional remote ID locator with F-connector and 8-pin 
modular jack. See page 15.

Magnetic hanging strap. Attach and use the strap as 
shown.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for MicroScanner Series







































































Reviews:

No comments