manualshive.com logo in svg

Fluke MicroScanner Series, User Manual, Page: 11 / 70

Share
Download
Fluke MicroScanner Series User Manual Download Page 11

1

MicroScanner

™

 Series Cable Verifiers

Introduction

The MicroScanner

2

 and MicroScanner PoE Cable Verifiers 

are hand-held test instrument that let you verify and 
troubleshoot the wiring of twisted pair and coaxial cables 
and detect network services.

The testers do the following:

•

Measure length up to 1000 ft (305 m).

•

Detects opens, shorts, and split pairs on twisted pair

 

cabling.

 

The MicroScanner

2

 also detects faults on

 

coaxial cabling.

•

Displays wiremap, cable length, proportional

 

distance to opens, and the remote ID number all on

 

one screen.

•

Detects Ethernet ports on twisted pair cabling and
reports the port speed.

•

Detects PoE (Power over Ethernet) and telephone
voltages on twisted pair cabling.

•

IntelliTone

™

 function works with an optional Fluke

Networks IntelliTone probe to help you locate and
isolate cables behind walls, at patch panels, or in
bundles. The analog toner works with standard
analog probes and includes the SmartTone

™

 function 

for positive identification of cables in bundles.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for MicroScanner Series







































































Reviews:

No comments