Fluke 8845A, User Manual

Page: 62 / 103

8845A/8846A
Users Manual
3-20
Note
Each memory file will store up to 10000 readings. If the number of samples
is set to a value greater than 10000, consecutive memory files will be used
to store all the samples. If the readings fill the last file (999), reading
storage will stop.
Recalling Readings from Memory
To recall readings from internal memory:
1.
Press
M
.
2. Press the
RECALL READING
soft key.
The Meter displays the first stored reading from the internal file. Four soft keys
provide the means to scroll through the readings stored in the file. The
FIRST
soft
key displays the first reading in the file while the
LAST
soft key displays the last
reading. Use the
<--
and
-->
soft keys to move forward and backward through the
file one reading at a time.
To recall readings from external memory (8846A Only), the memory device must be
removed from the 8846A and plugged into a PC where the comma delimited files can be
read. Each file is labeled MEAS0XXX.CSV. The XXX is the file number starting at 001
and going up to 999. Each file is date and time stamped.
Storing Meter Configuration Information
Up to five meter configurations can be stored in the Meter’s internal memory. The
8846A, with optional USB memory installed, can store an additional 99 configurations in
the external memory.
To store a meter configuration in the Meter’s internal memory:
1.
Press
M
.
2. Press the
STORE CONFIG
soft key as shown below.
F1 F2 F3 F4 F5
0.5993
+
caw033.eps
3. Press the
STORE INT MEM
soft key.
4. Press one of the five soft keys labeled with the desired memory location to store the
present Meter configuration.
To store a meter configuration in to optional external memory (8846A Only):
1.
Press
M
.
2. Press the
STORE CONFIG
soft key.
3. Press the
STORE USB
soft key.
The Meter labels the first four soft keys with the first four memory locations.
CONFIG01
through
CONFIG04
. The fifth soft key is labeled
MORE
to allow
access to all 100 memory locations.