SUPER-DAQ Precision Temperature Scanner
General Maintenance
15
To replace the fuses, see Figure 1:
1. Remove any High-Capacity Modules or test leads from the Product where
hazardous voltage may be present.
2. Disconnect the mains-power cord from the power-entry module.
3. Insert a small, flat screwdriver blade into the narrow recess to the left of the
fuse holder and pry to the right until the holder pops out. The Product is
shipped with a replacement fuse of the same rating as the fuse installed in
the fuse block.
4. Replace the fuse with the replacements as listed in Table 2.
5. Slide the fuse holder back into the Product until it locks into place.
1
2
hcn027.eps
Figure 1. Fuse Replacement