SUPER-DAQ Precision Temperature Scanner
Safety Information
3
Warning
To prevent possible electrical shock, fire, or personal injury:
•
Read all safety information before you use the Product.
•
Carefully read all instructions.
•
Use the Product only as specified, or the protection supplied
by the Product can be compromised.
•
Examine the case before you use the Product. Look for cracks
or missing plastic. Carefully look at the insulation around the
terminals.
•
Do not use the Product if it operates incorrectly.
•
Do not use the Product if it is damaged.
•
Disable the Product if it is damaged.
•
Use only the mains power cord and connector approved for
the voltage and plug configuration in your country and rated
for the Product.
•
Replace the mains power cord if the insulation is damaged or
if the insulation shows signs of wear.
•
Make sure the ground conductor in the mains power cord is
connected to a protective earth ground. Disruption of the
protective earth could put voltage on the chassis that could
cause death.
•
Do not put the Product where access to the mains power cord
is blocked.
•
Use only correct measurement category (CAT), voltage, and
amperage rated probes, test leads, and adapters for the
measurement.
•
Use only cables with correct voltage ratings.
•
Do not use test leads if they are damaged. Examine the test
leads for damaged insulation and measure a known voltage.
•
Do not exceed the Measurement Category (CAT) rating of the
lowest rated individual component of a Product, probe, or
accessory.
•
Keep fingers behind the finger guards on the probes.
•
Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.