You should now have a screen that looks very similar to the one that is shown above. The
one above has tube A1 missing and the progress bar and decode results in the bottom left
hand corner of the screen shows that we have 95 tubes OK and one that has failed. There
are lots of other buttons on this screen which will come back to later. Now move the mouse
to
white text entry box
called
Rack ID
:
left mouse click
inside the white box area and
type
in the Rack ID that is on the rack barcode, if it does not have one just type test. Now
left mouse click
the
OK button
to the right hand side of this dialog.
This concludes the first execution of the XTR-96 Software this sets up the system ready for
use. Now
left mouse click
the
Exit button
on the bottom right hand corner of the main
screen.
10
