FW-F093-P-MAN-EN_v0101_01
Page 36
Sensor excitation
Type PB / PC / PX
Sensor supply voltage: 3.2V DC for pulse signals and 1.2V DC for coil pick-up.
Please note: this is not a real sensor supply. Only suitable for sensors with a very low power
consumption like coils (sine wave) and reed-switches.
Type PD
With pulse input type P: sensor supply 1.2, 3.2, 8.2V DC - max. [email protected] DC.
Type PF / PM
With pulse input type P: sensor supply 1.2, 3.2, 8.2, 12 and 24V DC - max. 400mA@24V DC
Terminal connections
Type:
Removable plug-in terminal strip. Wire max. 1.5mm2 and 2.5mm2
Data protection
Type
EEPROM backup of all settings. Data retention at least 10 years.
Pass code
Configuration settings can be pass code protected.
Hazardous area
(option)
Intrinsically safe
Type XI
ATEX approval:
II 1 G Ex ia IIC T4
II 1 D Ex iaD 20 IP 65 / 67 T 100°C
IECEx approval:
Ga Ex ia IIC T4
Ex iaD 20 IP 65 / 67 T 100°C
CSA / FM approval :
IS Class I/II/III, Division 1 Groups A to G T4
Class I zone 0 AEx ia IIC T4
Explosion proof
Type XF
ATEX approval ref.: <EX> II 2 GD EEx d IIB T5. Weight appr. 15kg.
Dimensions of enclosure: 350 x 250 x 200mm (13.7” x 9.9” x 7.9”) LxHxD.
Environment
Electromagnetic
compatibility
Compliant ref: EN 61326 (1997), EN 61010-1 (1993)
Low voltage directive
Compliant ref: EN60950.
Tachometer
Type P
Coil/sine wave (minimum 20mVpp or 80mVpp - sensitivity selectable), NPN/PNP, open
collector, reed-switch, Namur, active pulse signals.
Frequency Minimum 0 Hz - maximum 7 kHz for engine speed.
Maximum frequency depends on signal type and internal low-pass filter.
E.g. Reed switch with low-pass filter: max. frequency 120 Hz.
K-Factor 0.000010 - 9,999,999 with variable decimal position.
Low-pass filter Available for all pulse signals.
Note For coil signal input: higher sensitivity is available - type ZF (10mVpp) / type ZG (5mVpp).
Alarm output
Function
high, low or high and low engine speed alarm.
Type OT
One passive transistor output - not isolated. Load max. 50V DC - 300mA.
Type OA
One active 24V DC transistor output; max. 400mA per output (requires type PF or PM).
Type OR
One mechanic relay output; max. switch power 230V AC - 0,5A (requires type PF or PM).
OUTPUT
INPUT
