FW-F093-P-MAN-EN_v0101_01
Page 15
CLR HRS
43
This function, Clear Hours, determines if the running hours can be reset to
zero at Operator level (by clicking CLEAR twice) or only at SETUP-level,
(SETUP 11 – CLEAR). The following can be selected:
DISABLE - ENABLE
ALARM SET
44
This function determines if the RPM alarm values can be set at both
Operator level and SETUP-level or at SETUP-level only.
If SETUP has been selected, the alarm values are still visible for the
Operator but can not be changed. The following can be selected:
OPERATE - SETUP
ACC HRS
45
This function determines if the ACCumulated running HouRS are
displayed on the display after pressing “SELECT” twice or not.
DISPLAY - HIDE
The functions below will only effect the optional LED-backlight.
BACKLIGHT
(OPTION)
46
If a LED backlight has been supplied, the color can be selected with this
function. Following selections are available:
OFF - GREEN - AMBER
BL ALARM
(OPTION)
47
In case the F093-P generates any alarm, the backlight can be set to
change to red. Following selections are available:
OFF:
during alarm the color is according to setting 47.
ON:
during alarm the color is red.
FLASH:
during alarm the color flashes red and the color as per
setting 47.
BRIGHTNESS
(OPTION)
48
The density of the backlight can be set in following range:
1 - 5
One is minimum and five is maximum brightness
5 - POWER MANAGEMENT
When used with the internal battery option, the user can expect reliable measurement over a long
period of time. The F093-P has several smart power management functions to extend the battery life
time significantly. Two of these functions can be set:
LCD NEW
51
The calculation of the display-information influences the power
consumption significantly. When the application does not require a fast
display update, it is
strongly advised
to select a slow refresh rate.
Please understand that NO information will be lost; every pulse will be
counted and the output signal will be generated in the normal way.
The following can be selected:
Fast - 1 sec - 3 sec - 15 sec - 30 sec - off.
Example battery life-time:
life-time with a coil pick-up, 1kHz. pulses and FAST update: about 2 years.
life-time with a coil pick-up, 1kHz. pulses and 1 sec update: about 5 years.
Note:
after a button has been pressed by the operator - the display
refresh rate will always switch to FAST for 30 seconds. When "OFF" is
selected, the display will be switched off after 30 seconds and will be
switched on as soon as a button has been pressed.
