16
17
STEP 10:
FINE-TUNE TANK WATER LEVEL
STEP 11:
FINE-TUNE FLUSH
A: FLUSH THE TOILET TO
CHECK THE TANK WATER
LEVEL
After the water stops filling the
tank, the water level should be
roughly ½ inch
below the top
of overflow pipe to ensure a
proper flush.
A: TEST FLUSH
Drop 3 squares of toilet paper in
bowl then flush.
B: WATER LEVEL IS TOO LOW
Turn the tank water level adjustment screw clockwise to
raise the float. Flush to reset water level.
WATER LEVEL IS TOO HIGH
Turn the water level adjustment screw counterclockwise to
lower the float. Flush to reset water level.
1/2"
Overflow
Pipe
See Step 7A for Full Tank view.
Tank Water Level
Adjustment Screw
+
–
MORE
WATER
FLUSHED
LESS
WATER
FLUSHED
B: ADJUST FOR MOST EFFICIENT FLUSH
Continue to adjust dial down one setting and flush until toilet
is unable to flush paper properly.
C: FINAL SETTING
Once unable to flush, adjust dial up one for final setting.
Hint: The higher the number,
the longer the flapper stays
open for more water flushed.
Note: Turn off water. Remove flapper for easy adjustment (see Step 6).