6
ASSEMBLY INSTRUCTIONS
Take caution when handling light bars. Ensure the LED
array does not come in contact with sharp objects or
force that may damage the diodes.
Unbox and unfold module and place on flush, s
table surface .
There are two ways to mount your power supply: attach
to the light bars or remote mount to a surface .
A.
Ensure the quick-release mechanism on light
bar clip is positioned according to diagram before
sliding into place . The spring tab will lock light bar into
place when properly centered .
i.
When the module is unfolded and LEDs are
facing down against the flush surface, attach
Power Supply Light Bar Brackets to the center
two bars and press firmly until they snap into place .
SAFTEY NOTE: Light Bar Brackets must be
installed only on the light bars and parallel to
the ground mounted to the light bars
1
2
