3
GENERAL CARE
SPYDR Series systems are passively cooled with zero moving components .
They are designed for harsh environments and years of maintenance-free
performance . Some basic care will keep your system operating at peak
performance cycle-after-cycle .
•
Natural convection removes heat away from the heatsink . In order for
the system to properly cool itself, at least one inch of space is required
between the console and the roof of your grow area . Failure to do so may
shorten the fixture’s lifespan .
•
To achieve the optimal lifespan and performance of your fixtures, routinely
check for and remove excess dust, debris, and mineral build up from
heatsink and LED array . Cleaning should always be done with the fixture
unplugged from its power source using low-pressure compressed air or
water to rinse away dirt from light bars .
•
Never use a cloth to clean the diode array . Doing so can scratch or
compromise the integrity of the silicon seal, or dislodge diodes entirely .
•
To limit degradation, avoid touching the diodes with your hands, even in a
powered off state .
For detailed instructions for maintenance and cleaning,
please visit www.fluence.science/support/.
SPYDR LED solutions are
high-performance lighting systems.
Do not touch while in operation.
Last and most important, please
recycle all packaging material.
Future generations will thank you.
