2
IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS
•
Please read this manual thoroughly before attempting to install or
operate any Fluence SPYDR Series system .
•
After successful installation and configuration of the system, be sure to
retain this manual in a safe place for future reference . Safety is a key
component to a long lasting and trouble-free installation .
•
It is important you read, fully understand, and observe the subsequent
safety precautions . If you are not comfortable with the installation of
high performance lighting systems, you should seek the services of a
qualified installation professional or call us for help .
•
NOTICE: The SPYDR 2x, SPYDR 2p and SPYDR 2i are high-performance
lighting systems . Do not touch while in operation .
•
Connect the system only to the power sources of the appropriate voltage
using the AC plug type received . Protect power cables from being
pinched, walked on, or otherwise damaged . Be especially careful where
the power cable enters the power outlet and the unit . Only connect the
system to an electrical outlet or extension cord of appropriate type and
rating . Connect the system only to the power sources of the correct
voltage using the plug received .
•
DO NOT defeat the safety purpose of a grounding or polarized plug by
removing ground pins or using unsafe adapters . A polarized plug has
two blades –one wider than the other . A grounding plug has a third
ground prong in addition to the two main conductors . The wide blade
or third grounding prong is provided for your safety . If the provided plug
foes not fit your outlet, consult an electrician to replace your obsolete
outlet . If you replace the power cord, only use one of similar type and
equal or greater current rating .
•
The system should only be cleaned as directed in the manual . You should
seek service for your system by qualified service personnel if any of the
following occur:
1 . The power-supply cord or the plug has been damaged .
2 . The unit has been exposed to rain .
3 . The unit exhibits a marked change in performance .
4 . The unit has been dropped, or its enclosure or chassis is damaged .
CULTIVATION BEST PRACTICES
Fluence encourages everyone to experiment and pursue their own techniques .
Every crop is different and everyone has different goals . However, our internal
research has given us insight into several strategies we would like to share .
•
Regularly check your plants’ growth and health . Fluence lighting systems
deliver high levels of PAR, typically more than experienced in nature .
Adjustments to H2O, CO2, RH, nutrients, and temperature are typically required .
•
Mount the fixture at least 6” from the top of your canopy to ensure optimal
uniformity and consistent PPFD . The SPYDR Series was designed to provide
uniform light dispersion and requires precise deployment . A 1” variation in
either direction will have a significant change in uniformity and PPFD (which
may or may not be desired) .
•
Many plants prefer higher temperatures when exposed to high PPFD .
Experiment with higher temperatures to achieve higher yields . Canopy
temperature and room ambient temperature often vary . For accurate results,
test at the canopy level to gauge leaf surface temperature .
For cultivation recommendations visit
www.fluence.science/cultivation-guide/
