StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
The "Apply All" button will apply and the modified parameters from all tabs. The Apply All will only
apply the changes to the parameters with a pencil or modified parameters.
WARNING: Applying the configuration changed to the parameter values may cause sudden
valve movement and/or loss of control.
The "Retrieve All" button will retrieve the entire configuration from the device.
Note: If a parameter was modified and displayed the pencil mark, after the Retrieve All from the device
the pencil mark will disappear and the parameter value will be the same as the value in the device.
The "Load All" button will open an open file dialog to select a StarPac configuration file (*.VCT). Once
the file is loaded into the DTM, differences between and the file will be displayed by the Pencil Mark
( ).
