StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
The "Load All" button will open an open file dialog to select a StarPac configuration file (*.VCT). Once
the file is loaded into the DTM, differences between and the file will be displayed by the Pencil Mark
( ).
Note: The entire configuration is load into the DTM memory and displayed with the pencil mark. To
apply the parameter changed, click the Apply All button.
The "Save All" button will open a save file dialog to save the entire configuration to a selected StarPac
configuration File (*.VCT)
The "Print Parameters" button will display a dialog to select to print a download from device or the
loaded configuration from file.
Clicking "Yes" will start the download from the device and disable all buttons on the page.
Clicking "No" will open an open file dialog to select the configuration file to print the parameter / values
list.