StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
The
Load VCT
button will open an open file dialog to allow the select of a VCT file to be load into
memory.
The
Save VCT
button will save the entire configuration store in the memory of the DTM to a folder
location and file name. A
save file
dialog will allow the selection of the folder location and file name.
Note: The
Save VCT
button will only be enable once the entire configuration is load into memory
either from the
Retrieve All
or the
Load VCT
functionality is complete.
The
Abort
button will abort the current retrieval of the StarPac Configuration.
Note: If no configuration is stored in memory, this action will stop the
Save VCT
button from been
enabled.