IPS BEACON ENGLISH 26999949 03-13
Page 5 of 16
flowserve.com
Each product has a unique serial number. Check that
this number corresponds with that advised and always
quote this number in correspondence as well as when
ordering spare parts or further accessories.
2.2 Handling
Boxes, crates, pallets or cartons may be unloaded
using fork lift vehicles or slings dependent on their
size and construction.
2.3 Storage
Store the equipment in a clean, dry
location away from vibration. Leave protective covers
in place to keep dirt and other foreign material out of
casing.
2.3.1 Storage and packaging
Normal packaging is designed to protect the unit and
parts during shipment and for dry, indoor storage.
After unpacking, protection will be the responsibility of
the user.
2.4 Recycling and end of product life
At the end of the service life of the product or its
parts, the relevant materials and parts should be
recycled or disposed of using an environmentally
acceptable method and in accordance with local
regulations. If the product contains substances that
are harmful to the environment, these should be
removed and disposed of in accordance with current
local regulations.
2.5 Disposal Instructions
At the end of the product’s life, do not dispose of
any electronic component or instrument in the domestic
waste. Disposal should be done in accordance with
applicable regulations, which vary from state to state
and country to country. The IPS Beacon unit includes a
built-in battery and should be disposed of in accordance
with applicable battery disposal regulations. Batteries
should not be incinerated, unless suitable procedures
are followed and qualified handlers have taken
appropriate precautions. Exposure of these cells to
high temperatures or fire can cause the cells to vent
and/or rupture. These cells do not contain dangerous
substances. The reaction products are inorganic and
do not represent environmental hazards, once the
decomposition or neutralization process has terminated.
Disposal in Europe
Batteries for disposal should not be transported by air.
For road transport of dangerous goods ADR special
provision 636 and packing instruction 903a apply.
Disposal in US
Hazardous waste of spent batteries can be disposed
after they are first neutralized through an approved
secondary treatment prior to disposal. Disposal of
spent batteries should be performed by authorized,
professional disposal company, which has the
knowledge in the requirements of the Federal, the State
and the Local authorities regarding hazardous
materials, transportation and waste disposal. In any
case it is recommended to contact the local EPA office.
3 DESCRIPTION
The IPS Beacon is a cost effective means of
measuring the basic health of equipment. It is
designed to quickly convey the health of any
equipment it is attached to, based on vibration and
temperature measurements.
The IPS Beacon is a battery powered unit that offers the
ability to measure 3-axis vibration and temperature of
any equipment it is attached to. The IPS Beacon is
completely encapsulated including battery, electronics
and sensor packaged inside a 316L SS case. The IPS
Beacon also provides two LED indicator lights for a
quick visualization of equipment health.
3.1 Configurations
Base IPS Beacon unit is provided with preset factory
set points. Each unit also offers optional upgrades to
allow for data logging [see section 3.5
], data downloads to a PC
format and unit configuration.
The IPS Beacon offers the ability to program alarm
levels for each of the vibration axes (see Figure 3:
orientation) and temperature values. If those
alarm levels are exceeded, the IPS Beacon will provide
a visual indication using the LED indicator lights and
also log the last alarm value for each of the data
parameters.
3.1.1 Factory preset alarm settings
The IPS Beacon comes pre-programmed with the
following default settings for the user-configurable
options:
