LI5X Process & Temperature Meter Instruction Manual
46
Calibrating the Meter (
Cal
)
To scale the meter without a signal
source refer to Scaling the Meter
(scal), page 44.
The meter can be calibrated to display the process in engineering units
by applying the appropriate input signal and following the calibration
procedure.
The use of a calibrated signal source is strongly recommended to cali-
brate the meter.
inp1
dis1
0
4.00
Set Display 1
Value
inp2
Calibrate
Input 2
Cal
Display
Flashes
Accepting
Input
See
Scaling the Meter
for Button
Functions Description
Recalibrating Temperature Inputs (
Cal
)
Remember, the meter is
calibrated
at the factory prior to shipment.
Recalibration is recommended at least every twelve months.
The
Calibration
(
CAL
) menu is used to
recalibrate
the thermocouple and
RTD inputs.
Allow at least 30 minutes warm-up time
before performing recalibration proce-
dure to ensure specified accuracy.
Spec Tech Industrial Electric
www.spectechind.com
888-773-2832
Spec Tech Industrial Electric
www.spectechind.com
888-773-2832
