MN310140 Rev A2
37
|
Wiring
(continued)
Step Six
VOLTAGE OUTPUT
EchoPod
®
can be configured as a 0 to 5 VDC or 0 to 10 VDC output. A resistor will need to be added to the
circuit to enable a voltage output (refer to the wiring diagram below).
0-5 VDC output
o
Add a 250 Ohm resistor
o
Actual output will be 1 to 5 VDC
0-10 VDC output
o
Add a 500 Ohm resistor
o
Actual output will be 2 to 10
VDC
