MN310140 Rev A2
19
|
Configuration Using WebCal
®
(continued)
Step Three
With EchoPod
®
connected to your computer, open the WebCal
®
* software by clicking on the WebCal
®
icon.
Follow steps 3-6 to configure the transmitter. Click “Help” in the lower right hand corner and open the help
menu of WebCal
®
for instructions on WebCal
®
. If you need additional assistance using WebCal
®
, please
contact a Flowline applications engineer at (562) 598-3015.
Note:
For complete information on the WebCal
®
software, please refer to the WebCal
®
manual located at .flowline.com/webcal-software/.
STEP 3 - SENSOR CONFIGURATION:
Configures the Loop Fail-Safe, Output at Empty and Startup Condition for the sensor.
Note: When connecting the sensor to the WebCal
®
Software, you must remove the display or the software will
not connect. Once completed, you can re-connect the display to the terminal.
Note: When configuring EchoPod
®
, choose
either the WebCal
®
or Push Button method.
Either method will accomplish the goal of
sensor configuration. Changes to the
configuration can be made using the
alternative method. When beginning with
one method, it is recommended to
complete the configuration before using the
other method to make any adjustments.
