|
32
MN310140 Rev A2
Wiring
Step Six
WIRING DIAGRAM - SAMPLE
WIRING ECHOPOD
®
Once EchoPod
®
has been configured; follow the Wiring Diagram provided by the WebCal
®
software. A typical
wiring diagram is shown above. Flowline recommends using a qualified licensed electrician to wire EchoPod
®
with your application’s components.
Configure your EchoPod
®
with WebCal
®
and use the wiring diagram button to view the appropriate
diagram. Each configuration will have its own unique diagram. The diagram shown above is only a
sample and should not be used as a wiring diagram.
The analog output of the EchoPod
®
is a loop powered 4-20 mA control circuit. The typical way to use
this feature is to connect a positive supply to the (+) input and to sense the current flow out of the (-)
output.
Sample Wiring Diagram
Diagram will change based upon
the sensor’s configuration, use
WebCal
®
to view appropriate wiring
diagram.
