FLOWFITNESS Runner DTM2000i, User Manual

Page: 96 / 100

96 - Manual Runner DTM2000i Treadmill
5. General information
Problem:
The computer of the treadmill is not switching on.
Solution:
-Check if the plug is connected to a grounded outlet
-Check if the switch near the adapter cable is set to ON or I.
-Check if the fuse near the switch . If the fuse is broken contact your reseller.
Problem:
Segments of the screen don’t light up.
Solution:
The screen LED are damaged, contact your reseller.
Problem:
The screen shows “Please install safety key”.
Solution:
The safety key is not placed (correctly). Place the safety key into the designated
area of the treadmill.
Problem:
My iOS or Android device is not connecting to the DTM2000i.
Solution:
1. Turn off any app used for connecting to the DTM2000i.
2.
Turn off the treadmill with the 1/0 switch. Wait 5 seconds, and turn the treadmill
back on again.
3.
Enter the bluetooth settings menu of your mobile device. Choose the option
“Forget this device” and turn off the bluetooth
4. Repeat the bluetooth connection steps described in this manual.
In case your problem is not resolved or not described, consult the fitness reseller
where you purchased this product.
4.3 Troubleshooting