GW-GNET+
4
gas-net
C1 and C2
Page 4-5
4.3 Extras:
GW-GNET+ service programs
The GW-GNET+ program includes some additional service programs fulfilling
different tasks relating to
gas-net
devices. The range of available service pro-
grams depends on the
gas-net
device type.
For instance, the following tools are available for
gas-net
C1 and C2 devices:
Edit
parameterization
for changing the parameterization during an estab-
lished data connection to the device.
Purely operational parts of the parameterization can
be changed this way, even though the user switch is
closed.
Note:
Please refer to the GW-GNET+ online help for
further instructions.
Change
parameters
for changing individual parameters during an estab-
lished data connection to the device.
Note:
Please refer to the GW-GNET+ online help for
further instructions.
DSfG bus access
Starts GW- via the data interface, if
installed. Facilitates the data access to all devices
connected via DSfG; for instance, for reading out
archive data and viewing current data.
These programs may only be activated via the DSS data interface with the data
connection being established. Proceed as usual:
1. Start GW-BASE on your laptop.
2. Connect the DSS interface of the
gas-net
device to a COM interface of the
laptop using a parameterisation cable.
3. Start the communication program by clicking the
Import – Data interface
tool in the GW-BASE toolbar. After the data connection to the device has
been established, the type plate of the connected device appears on your
monitor.
4. Select the
Tools
tab. The appearing tab lists all available service programs.
5. Start the desired program by double-clicking it.
The functional range of the service programs is manageable and practical. They
are therefore quite easy to operate. Comprehensive online help, which can be
activated via the
Help – Content
menu item or by pressing the
F1
key, is avail-
able for each program.
