4
GW-GNET+
Page 4-4
gas-net
C1 and C2
5. After the reading in has been finished, you can close the communication
program via the main menu item
File – Exit
.
The parameter data record is filed in the GAS-WORKS worksheet under the
specified name. Before you can start GW-GNET+, you have to file this data
record away in the hierarchy. It is principally impossible to process data records
when they are still in the worksheet.
And this is how to edit an existing parameter data record:
1. Mark the parameter data record in the configuration window of GW-BASE.
2. Select
Data – Edit
from the main or context menu.
GW-GNET+ starts.
3. Edit the parameterisation according to your demands.
4. Save the changes you made:
By clicking
Save
you save the data record under its old name.
If you select the
Save as
menu item, you can save the data record under a
new name. In this case, the newly created data record is transferred to the
GW-BASE worksheet first and must then be incorporated in a suitable
hierarchy.
5. Close GW-GNET+, and export the changed parameterisation as described
in Chapter 4.1, steps 8 to 11.
9
For brief instructions see footnote 8, page 6-2.
10
For brief instructions see footnote 8, page 6-2.
