4
GW-GNET+
Page 4-2
gas-net
C1 and C2
2. Invoke the GW-GNET+ module by clicking the
New – Create gas-net
parameterisation
tool in the toolbar. Alternatively, you may select the
Tools – New – Create gas-net parameterisation
menu item from the main
menu.
3. Select the device type you want to parameterise in the appearing dialog box
and in the next step the version number of the device software. Choose an
existing standard parameterisation, on which the new parameter data
record shall be based, in the following dialog box.
After you have confirmed your selection by clicking
OK
, the GW-GNET+
interface is activated.
4. Within
the
Modules and Linkages
window, each module included in the
device software is listed by name and the corresponding icon. By double-
clicking this line you activate a dialog listing all parameters that belong to
the module concerned.
Adjust the settings according to your requirements.
Tip:
There is a corresponding topic for every adjustable parameter within
the context-sensitive online help (mark the parameter and press
Ctrl + F1
).
5. Go through all modules in this way until all adjustments meet your
demands.
6. Select
File – Save
as,
and enter the name under which the parameter data
record shall be saved in GAS-WORKS. Close GW-GNET+, for instance via
the
File – Exit
menu item.
7. The parameter data record is now in the worksheet of GW-BASE. Before
exporting it to the device, you have to drag it into a suitable hierarchy of the
GAS-WORKS data management.
8
To drag a data record from the worksheet into a hierarchy, proceed as described below:
1. Mark the target hierarchy (which you must possibly create first).
2. Drag the data record from the worksheet into the right half of the configuration window
using the mouse.
Alternatively, you can also drag the data record directly to a folder in the hierarchy (on the
left in the configuration window).
Please refer to the GW-BASE online help for further information.
