SEE ALSO:
For more information about object parameters, see section 16 – Thermographic
measurement techniques on page 80.
9.2.4.4
Manual adjust / Continuous adjust
■
Point to
Manual adjust
and press the joystick to put the camera in manual adjust
mode. You can now change level and span by first pressing the
C
button repeat-
edly (to change the function of the joystick to level/span), and then change
level or span by moving the joystick up/down and left/right, respectively
■
Point to
Continuous adjust
and press the joystick to put the camera in automatic
mode, continuously optimizing the image for best level and span
SEE ALSO:
For more information about the
Level/Span
command, see section 9.2.4.3 – Level/Span
9.2.4.5
Palette
10392003;2
Figure 9.20
Palette
dialog box
Point to
Palette
and press the joystick to display a dialog box where you can
change the color palette.
Figure 9.21
Explanations of the
Palette
dialog box
Comments
Value
Label
Move the joystick left/right to
change the palette.
Configuration-dependent
Palette
Move the joystick left/right to
reverse the current palette.
■
Yes
■
No
Inverted
9.2.4.6
Hide graphics
Point to
Hide graphics
and press the joystick to hide all on-screen graphics (
e.g.
result table, status bar
etc.
). To display the graphics again, press the joystick or the
C button.
9.2 – Menu system
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
47
