8.2
Keypad buttons & functions
Figure 8.4
Camera buttons – explanations
Comments
Button
■
Press briefly to switch on the camera
■
Press and hold down for a few seconds to switch off the cam-
era
ON/OFF
■
Press briefly to autoadjust the camera
■
Press and hold down for a few seconds autofocus the camera
A
■
Press briefly to freeze an image
■
Press briefly to store an image if the image is currently frozen
■
Press and hold down for a few seconds to store without
freezing the image
■
Press to move between panes in some dialog boxes
■
Press to leave freeze mode and go to live mode
S
■
Press to leave dialog boxes without changing any settings
■
Press twice to leave edit mode
■
If the camera is in manual adjust mode, press to change the
function of the joystick to level (up/down) and span (left/right)
C
■
Press to display the menu system
■
Press to exit the menu system
■
Press to confirm selections and leave dialog boxes
■
Press to select the spot
■
Move up/down or left/right to navigate in menus, dialog
boxes, and on the screen
■
Move up/down to change focus and left/right to zoom
■
If the camera is in manual adjust mode, press C to change the
function of the joystick to level (up/down) and span (left/right)
Joystick
Press + or – to focus
+/–
Press to autoadjust
F1
Press to autofocus
F2
8.3
Autofocus
To focus the camera using the autofocus feature, press and hold down the
A
button for one second.
NOTE:
Please note the following:
■
The area that the camera uses when autofocusing is a 80 × 60 pixel box, centered vertically and
horizontally on the screen
■
The camera will have difficulties autofocusing when the image has low contrasts between different
areas
■
You should keep the camera steady when autofocusing
36
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
8.2 – Keypad buttons & functions
