FLIR ThermaCAM P20, Operator'S Manual

Page: 115 / 142

6 5 4 3 2 1
9 0.97 LW 70 anodized, light
gray, dull Aluminum
9 0.61 SW 70 anodized, light
gray, dull Aluminum
2 0.55 T 100 anodized sheet Aluminum
4 0.09 T 100 as received, plate Aluminum
2 0.09 T 100 as received, sheet Aluminum
9 0.46 LW 70 cast, blast
cleaned Aluminum
9 0.47 SW 70 cast, blast
cleaned Aluminum
4 0.05 T 100 dipped in HNO
3
,
plate
Aluminum
3 0.09 3
µ
m 27 foil Aluminum
3 0.04 10 µ m 27 foil Aluminum
1 0.2–0.3 T 50–500 oxidized, strongly Aluminum
1 0.04–0.06 T 50–100 polished Aluminum
2 0.05 T 100 polished, sheet Aluminum
4 0.05 T 100 polished plate Aluminum
3 0.28 3
µ
m 27 roughened Aluminum
3 0.18 10 µ m 27 roughened Aluminum
1 0.06–0.07 T 20–50 rough surface Aluminum
9 0.03–0.06 LW 70 sheet, 4 samples
differently
scratched Aluminum
9 0.05–0.08 SW 70 sheet, 4 samples
differently
scratched Aluminum
2 0.04 T 20 vacuum deposit-
ed Aluminum
20.2 – Tables
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
103