1
1. INTRODUCTION
1.1
Purpose and Scope of this Technical Manual
The SeaFLIR II Imaging System is equally at home on land, at sea, or in
the air. This manual is intended to provide the information necessary to
familiarize the user with the procedures needed to install, setup, operate,
shut down, and perform operator-level maintenance on the SeaFLIR II
Imaging System. There are two SeaFLIR II configurations both are
covered in this manual. The SeaFLIR II-C model is equipped with an IR
camera 1.8X optical extender to increase its standoff capability.
•
SeaFLIR
II IR, Color CCD Camera
•
SeaFLIR
II-C IR w/1.8X Ext., Color CCD Camera
1.2 General
The SeaFLIR II Imaging System provides the user with a remote
controlled day/night, high resolution, infrared (IR) imaging, color video
and an optional Laser Pointer capability. The platforms on which the
SeaFLIR II Imaging System can be installed range widely. It can be
installed and used on aircraft (fixed wing and helicopters), watercraft,
land vehicles or fixed locations. However, it is not intended for use on
high performance aircraft, speeds exceeding 250 mph (218 knots). The
SeaFLIR II Imaging System provides enhanced detection, recognition,
and identification of both stationary and mobile targets and the ability to
track (day/night). The SeaFLIR II Imaging System can also be used to
enhance the following types of operations:
Aerial Thermal Surveys
Insertion and extraction operations
Airborne Law Enforcement
Low visibility and night navigation
Border Patrol
Mapping of navigational hazards
Coastal observation and
surveillance
Maritime interception
Combat search and rescue Reconnaissance and surveillance
Defense
Search and Rescue
Drug interdiction
Security
Exclusive Economic Zone Patrols Situational Awareness
Force Protection
Visit, board, search, and seizure
operations
Identification of friend or foe (IFF)
Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard
