• Click
Settings panel password
to protect the
Settings
page with a password. This
opens a dialog box. Select the
Protect settings panel with password
check box and
enter the password.
10.3.6
Updates
tab
Select how you want to manage updates of the FLIR Screen-EST.
When the
Check if updates are available
check box is selected, a check for updates will
automatically be performed every time the application is started.
When the
Prompt to install updates
check box is selected, you will be asked to install
any available updates. The
Check if updates are available
option must also be enabled.
If updates need to be downloaded via a proxy service, an additional configuration is
needed. In the
Proxy settings
dialog box, select the
Use proxy
check box, and then enter
the requested information. Click
OK
to save.
Note
To check for and download updates, internet connection is required.
10.3.7
Theme
tab
Change the theme of the user interface. FLIR Screen-EST will restart to apply the new
settings.
10.3.8
File explorer
tab
Select if you want to show hidden files and display folder previews.
10.3.9
Editor
tab
Change the file path to the folder where your custom palettes are located.
10.3.10
Regional settings
tab
Select the language and units to be used in the user interface. FLIR Screen-EST will re-
start to apply the new settings.
10.4
Integration with external systems
There are two ways to integrate FLIR Screen-EST with an external system:
• Digital output.
• Webhooks.
10.4.1
Digital output
A basic level of integration is possible if the FLIR camera has a digital I/O connector.
1. Connect an external device such as a gate, lights, or a siren to the digital I/O connec-
tor of the camera.
2. Configure FLIR Screen-EST to trigger a digital pulse depending on the screening re-
sult; Normal temperature or Elevated temperature. For digital output settings, see
section 10.3.3
10.4.2
Webhooks
Webhooks is a method for HTTP communication between different systems. By using
webhooks, FLIR Screen-EST can be controlled by a third-party system. As an example,
you can include FLIR Screen-EST screening in your access control system.
General workflow for a third-party access control system with FLIR Screen-EST
screening:
1. The visitor starts the sign-in process through the access control system.
2. The access control system prompts the visitor to perform a screening and sends a
Start
command to FLIR Screen-EST.
#T810570; r. AA/72255/72255; en-US
41