FLIR G300 pt Series, User Manual, Page: 30 / 80

Technical data 12
12.4 FLIR G300 pt 14.5° NTSC
P/N: 65502-0101
Rev.: 35207
General description
The FLIR G300 pt is a pan/tilt infrared camera for optical gas imaging (OGI) that visualizes and pin-
points leaks of volatile organic compounds (VOCs) without the need to shut down the operation. The
FLIR G300 pt is used in industrial settings such as oil refineries, natural gas processing plants, offshore
platforms, chemical/petrochemical industries, and biogas and power generation plants.
The FLIR G300 pt precision pan/tilt mechanism gives operators accurate directional control while pro-
viding fully programmable scan patterns, radar slew-to-cue, and slew-to-alarm functionality.
Key features
• H.264, MPEG-4, and MJPEG streaming.
• Built-in web server.
• 100 Mbps Ethernet (100 m cable, wireless, fiber, etc.).
• Composite video output.
• Precise pan/tilt mechanism.
• Daylight camera.
• IP66 encapsulation.
• IP control: The FLIR G300 pt can be integrated into any existing TCP/IP network and controlled with
a PC.
• Serial control interface: Pelco D or Bosch commands can be used over RS-232, RS-422, or RS-485
to remotely control a FLIR G300 pt camera.
• Multi-camera software: FLIR Sensors Manager allows users to manage and control a FLIR G300 pt
in a TCP/IP network.
Benefits
• Improved efficiency: The FLIR G300 pt reduces revenue loss by pinpointing even small gas leaks
quickly and efficiently, and from a distance. It also reduces the inspection time by allowing a broad
area to be scanned rapidly and without the need to interrupt the industrial process.
• Increased worker safety: OGI allows gas leaks to be detected in a non-contact mode and from a
safe distance. This reduces the risk of the user being exposed to invisible and potentially harmful or
explosive chemicals. With a G300 pt gas imaging camera unit it is easy to scan areas of interest that
are difficult to reach with conventional methods.
• Protecting the environment: Several VOCs are dangerous to human health or cause harm to the en-
vironment, and are usually governed by regulations. Even small leaks can be detected and docu-
mented using the FLIR G300 pt.
Detects the following gases: benzene, ethanol, ethylbenzene, heptane, hexane, isoprene, methanol,
methyl ethyl ketone, MIBK, octane, pentane, 1-pentene, toluene,
m -xylene, ethane, butane, methane,
propane, ethylene, propylene.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD <15 mK @ +30°C (+86°F)
Field of view (FOV) 14.5° × 10.8°
Minimum focus distance 0.5 m (1.64 ft.)
Focal length 38 mm (1.49 in.)
F-number 1.5
Focus Automatic using FLIR SDK, or manual
Zoom 1–8× continuous, digital zoom
Digital image enhancement Noise reduction filter, high sensitivity mode (HSM)
Detector data
Detector type Focal plane array (FPA), cooled InSb
Spectral range
3.2–3.4 µm
Sensor cooling Stirling Microcooler (FLIR MC-3)
#T559900; r. AB/35735/35735; en-US 24