427-0089-00-12 Version 100
July 2016
49
3
Advanced Configuration
3.2
Maintenance Menu
The following sections describe more advanced camera configuration options that require the
admin
login. For the configuration changes in the remainder of this chapter, it is necessary to save the
changes, then stop and restart the server to make the changes effective. Additional configuration
options are available that are not described in this manual. For more information on setting or
changing these camera parameters refer to the
Nexus IP Camera Configuration Guide
(FLIR Doc
#427-0030-00-28) or contact the local FLIR representative or FLIR Technical Support.
The basic camera configuration settings (
LAN Settings
,
Services
, and
Security Options)
available
through the
expert
login are described in
Server Menu, pg. 27
. When logged in as
admin
, additional
Maintenance menus are accessible, including
Sensor
,
Files
and
Product Info
.
3.2.1
Sensor Menu
The configuration changes commonly used are done through the Sensor menu.
Described below are configuration steps from the
Communications
and
Modules
selections.
Communications Menu
The primary IP configuration parameters, such as IP address, network mask, and
gateway, are configured with the LAN Settings page (describe in
LAN Settings, pg.
27
.) The Networking page can be used to configure some of the other IP
networking parameters.
Networking Page:
Generally it is assumed the camera network will be secured
through recognized network security measures and best practices, such as limited
physical access, firewalls, and so on. As an additional security consideration, it is
possible to restrict access to the camera to a limited number of IP Addresses.
It is possible to restrict access to the camera by remote clients by setting the “Allow Anonymous
Clients” to No, and then enter IP addresses for the clients that are allowed access in the Remote
Clients parameter.
