This document does not contain any export-controlled information.
Configuration
36
427-0108-00-10 - Revision 100 - December 2020
4.5
I/O Devices Page
The I/O Devices page provides configuration settings for external I/O connections and the device
managing those connections with the camera.
The following settings for the device managing the external I/O connections are available:
·
Enabled or Disabled
·
Device IP address and port
·
Input and output base addresses
You can define the number of input and output pins the device manages.
The following information appears for each pin:
·
I/O pin number
·
Type
—Input or Output
·
State
—the pin's current state: Open or Closed
For each pin, you can define the following:
·
Idle State
—Open or Closed
·
Alarm Auto Ack
—Yes or No
·
Enabled
—Yes or No
·
Reset Interval (for output pins only)
—between 0-600 seconds; specifying 0 seconds disables the
auto reset
To apply any change to settings on the I/O Devices page, click
Save
. To restore previously saved
settings, click
Discard Changes
.
For more information about how to configure the device managing the external I/O connections, refer to
the device's documentation.
www.
.com
1.800.561.8187
