This document does not contain any export-controlled information.
Operation
30
427-0108-00-10 - Revision 100 - December 2020
3.10 Full-Screen Mode
When the Elara FR-345-EST camera's web page will be shown to people being screened, you do not
want them to be able to access View Settings menus and System Settings. Therefore, you can enable
the
camera web page's full-screen mode by clicking
on the
In full-screen mode, you can:
·
Enable picture-in-picture—If thermal video appears in the primary view, visible video appears in a
smaller, floating picture, and vice versa.
·
Lock the camera web page in full-screen mode—To prevent people being screened from disabling full-
screen mode and accessing View Settings menus and System Settings. When the camera web page is
in full-screen mode, View Settings menus and System Settings are not available.
·
Exit full-screen mode
Tips
·
Before enabling full-screen mode, set up, configure, and verify the camera's web page settings.
, select the primary view for the display device, thermal
or visible video.
·
To view full-screen mode in portrait orientation, rotate the display device 90°; for example, if you are
using a tablet computer as the display device. Make sure auto-rotation is enabled on the display
device. This topic and the example images in it reflect the camera's web page in full-screen mode
and in landscape orientation, except where noted. The camera's web page in full-screen mode and in
portrait orientation is similar.
·
When the camera web page is not in full-screen mode, FLIR recommends viewing it in landscape
orientation.
Full Screen Mode
Landscape Orientation
www.
.com
1.800.561.8187
