This document does not contain any export-controlled information.
Operation
29
427-0108-00-10 - Revision 100 - December 2020
3.8
OSD Page
The camera can provide an on-screen display of the camera's
, and the date and
time. For each stream (V1, V2, and T1), you can:
·
Enable or disable the OSD
·
Enable or disable the camera name
·
Enable or disable the date & time
You can also specify:
·
Text Color
—Black or white, with or without a background
·
Font Size
—Small, medium, big, or giant
·
Position Camera Name
—Top or bottom; left, center, or right
·
Position Date & Time
—Top or bottom; left, center, or right
·
Bold
When enabled, the OSD appears in the video streams.
When V is selected for the live video view on the camera web
page, the V1 stream appears. Therefore, when OSD is enabled
for the V1 stream, the OSD appears in the live video image.
Enabling OSD on the V2 stream does not affect the live video on
the camera web page.
The camera immediately applies changes to settings on the
OSD page, affecting the live video images and streams. To save
those changes, click
Save
. To discard changes and restore previously saved settings or the factory
default settings, click
Reset
.
3.9
Georeference Page
Use the Georeference page to specify the camera's
geographical location and mounting position.
For geographical location, specify:
·
Latitude
, in degrees North or South
·
Longitude
, in degrees East or West
Tip
To obtain the camera's latitude and longitude, use a map or a
mobile GPS device.
For mounting position, specify:
·
Ground Altitude
, in meters above or below sea level
·
Installation Height
, in meters above the ground (must be greater than zero)
·
Orientation
: the installation angle of the camera, between 0-360 degrees from North
To apply any change to settings on the Georeference page, click
Save
. To restore previously saved
settings or the factory default settings, click
Reset
.
www.
.com
1.800.561.8187
