Operation — Operator instructions (Auto and Button mode)
5. The system displays a screening result.
•
No elevated temperature detected
The visitor exits the screening station.
•
Elevated temperature detected
You and the visitor follow the process for screening alarms that your company has
established.
12.4
Normal operation (Button mode)
The normal screening workflow includes the following operator tasks:
1. Prepare the system for a new screening session, see section 12.4.1
.
2. During the screening, you guide the visitors to a good screening and trigger the
screening by pressing the Bluetooth button. For more information, see section 12.4.2
If you run into problems, see section 12.5
.
You may get questions from the visitors about the screening. For answers to common
questions, see section 12.6
.
12.4.1
Start a new screening session
1. Make sure the screening station is in order:
• The stand with the camera and visitor display is placed at the correct position in
front of the screening position.
• The screening position is clearly marked.
• The camera is turned on. If not, see section 12.2.1
Note
The camera should be allowed to warm up for about 20 minutes before
performing the screening. This will help ensure the best results.
• The lens cover is removed from the camera.
• The camera image is visible on the display.
• The barriers, roll-ups, etc. are in place.
#T810583; r. AA/75420/75423; en-US
55
