Operation — Operator instructions (Auto and Button mode)
Note
Removing eyeglasses is crucial for a correct screening result.
• Optional: Backdrop.
A backdrop may be needed to prevent background disturbances from reaching the
camera, such as passing or queueing people.
• Optional: Operator display.
Secondary display placed near the operator for monitoring.
12.2
Quick guide to the camera
12.2.1
Turn on/off the camera
The camera can be powered continuously, but you may want to turn of the equipment, e.
g. to save energy or make room for cleaning.
• To turn on the camera, push the on/off button
.
• To turn off the camera, push and hold the on/off button
for more than 0.5 second.
12.2.2
Menu system
To display the menu system, push the navigation pad or tap the menu system button
.
To navigate the menu system, you can use the navigation pad or tap the camera screen.
12.3
Normal operation (Auto mode)
The normal screening workflow includes the following operator tasks:
1. Prepare the system for a new screening session, see section 12.3.1
.
2. The screening normally does not require any action from you. Depending on your
workflow, you may need to be available for guidance and alarms. See also section
12.3.2
.
If you run into problems, see section 12.5
.
You may get questions from the visitors about the screening. For answers to common
questions, see section 12.6
.
12.3.1
Start a new screening session
1. Make sure the screening station is in order:
• The stand with the camera and visitor display is placed at the correct position in
front of the screening position.
• The screening position is clearly marked.
• The camera is turned on. If not, see section 12.2.1
Note
The camera should be allowed to warm up for about 20 minutes before
performing the screening. This will help ensure the best results.
• The lens cover is removed from the camera.
• The camera image is visible on the display.
• The barriers, roll-ups, etc. are in place.
2. Enter initiation mode by first selecting another Recording mode and then selecting
the Screening mode again.
To change the Recording mode, select
(
Settings
) >
Recording mode
.
3. In the
Screening
dialog box, select
Auto
.
#T810583; r. AA/75420/75423; en-US
52
