67
12.2.2 Enable DHCP Function
Use
the
“
^
”
and
“v”
buttons
, and
,
to highlight NET DHCP; select ON. Then press the
Enter
button to proceed.
NOTE: This function can only work if the LAN which the unit is connected to has a DHCP server. If
the DHCP server is working, the DGR201 will obtain an IP address automatically from the
DHCP server. In that case please skip the section 2.3 (Set IP address) and follow section 3.
(TCP/IP Communication Software).
12.2.3 Set IP Address
You don’t need to set a NET IP for the unit if the LAN which the unit is connected to has a DHCP
server. Otherwise, please follow the instructions given below:
Use the
“
^
”
and
“v”
buttons
, and
,
to highlight the NET IP. Press the
Enter
button to enter the
NET IP page
Set the IP, MASK and GATEWAY. Then press the
Enter
button to proceed. The following is a
sample setting.
IP:
192.168.0.1
MASK: 255.255.255.0
GATEWAY:
0.0.0.0
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID
:
01
RS232
: ON
RS485
: ON
NET ENABLE
: ON
NET DHCP
: ON
NET IP
: SET
FTP SETTING
MAIN PAGE
SET ETHERNET DHCP
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
COMM ID
:
01
RS232
: ON
RS485
: ON
NET ENABLE
: ON
NET DHCP
: ON
NET IP
: SET
FTP SETTING
MAIN PAGE
SET ETHERNET
