42
BUZZER:
This option determines if the internal buzzer will sound for the following conditions…(the buzzer
lasts for approx. two seconds long)
ON:
Enables buzzer.
OFF:
Disables buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Enable/disable key lock function
Power on /off mobile rack HDD
Backup operation complete
Timer activate/deactivate
Recording switching between HDD
PASSWORD:
This option is used to a password to prevent any unauthorized re-formatting of the hard disk
drives, or unauthorized use by a network viewer. The default password is “9999”.
OLD PASSWORD:
Enter the pre-set password (or the default password if this is the initial
setting) to access the password setting system.
NEW PASSWORD:
Enter a 4-digit-number password to replace the pre-set password (or the
default password “9999”).
SETUP PWD:
When this option is on, the user must enter the password before entering the setup menu.
ON:
Enabled.
OFF:
Disabled.
DEFAULT:
This option allows you to reload the factory default setting. Please note that the password can not
be changed in the factory default setting.
SD SETUP:
The DGR201 offers a quick setup method by using a SD card. This is useful if many units are to
be configured with the same settings.
SAVE:
Saves the whole setting to the SD card.
